Volvo EX90 Center Console Organizer

Update: 03/17/2026 Added a NACS version that holds the adapter.  It must be paired with a "front short" model to fit correctly.

Update: 12/30/2024 Added more “front” variants.  Please check the notes under each STL file to see which each is compatible with.

The 2025 Volvo EX90's center console is pretty spacious but not very usable.  It is very deep.  So deep that Volvo added doors to divide the top from the bottom.  This model is a set of four modular parts that help to subdivide the top part of the console.

I chose to do separate pieces because the opening of the console is smaller than the cavity space.  This allows one to maximize the space and still get the organizer pieces inside the console.  You can mix and match side models and front/back models however you see fit.  All of them are symmetric.  Note that the “front long” model will only pair with a “front short” or “coin holder” model.  It is a very tight fit, I recommend putting in the sides first and then adding the front/back pieces to lock everything in place.  The STEP file is available if you want to remix.

Printed at 0.2 with no supports.  PETG would probably be recommended due to its heat tolerance but I'm going to try PLA+.  I will be checking to see if it ends up warping due to heat.  It won't be in direct sunlight so maybe there's a chance.