Brine Shrimp (Artemia) Hatchery Stand To Suit 1.25 Litre Coke Bottle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brine Shrimp (Artemia) Hatchery Stand To Suit 1.25 Litre Coke Bottle
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 196
- Wydruki
- 1
- Wyświetlenia
- 1114
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free.
UPDATE: December 24th, added a V3 no-mess lid if you are using a CO2 cap for your air delivery and extraction points as shown below.


UPDATE: December 18th, added a no-mess lid with one way breather holes. For the airline centre access hole you can use an optional rubber grommet like you see in the photo below, the OD needs to be 10mm and the ID 6mm or thereabouts. No supports are required.

A safe place to put your home made brine shrimp hatchery station made from a 1.25 litre Coke bottle. I've also included an optional lid.
No supports are required.
Happy printing.