Three-Headed Monkey (Monkey Island)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 2.1-dimendional three-headed monkey figurine from Monkey Island
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 56
- Wydruki
- 2
- Wyświetlenia
- 485
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
This is a 6-color nearly-flat three-headed monkey from Monkey Island. The front side has a slight relief structure. It is inspired by qbin's model, but completely made from scratch.
It uses 6 colors, so a 5-color MMU or PrusaXL won't suffice… Maybe you can omit one of the colors and paint it.
Load one of the STLs, then right-click/Add-Part/Load the other ones (or use the 3mf file) and assign colors to the model parts.
Since the relief steps are 0.4mm, I suggest a layer height of 0.2mm. I suggest scaling by multiples of 0.5, so 0.5, 1.5, 2, 2.5,… If you want to use 0.25mm layers for example, additionally scale by a factor of 1.25.
I also suggest to print a few of them at once to reduce the purge-waste-to-model ratio…