1 / 1
Tamiya DT-01 -- Gearbox Joint
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement for the joint and holder on which the gearbox pivots on the DT-01.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a printable replacement for the joint on which the gearbox pivots on the Tamiya DT-01. I created the files to resolve missing joint components on DT-01 that I own. It fits exactly as the original does; joint sliding into the chassis and joint holder screwed on top.
Printing
I recommend printing in PETG, with a layer height of l ≤ 0.2mm with supports, at least for the joint holder, as it has floating areas otherwise. I print it with a 0.4mm nozzle.
Post Print
This part doesn't require any major cleanup outside of supports.