Sillybutts Chimera Plunger Head
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An hybrid between the old and the new style of plunger head used in Sillybutts' designs.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 101
- Wydruki
- 2
- Wyświetlenia
- 1284
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the Chimera Plunger Head for the latest Sillybutts blaster designs. It is compatible with the Alchemist, the Wildstyle, the Foxbat and the Battle Axe. It uses the same hardware as the plunger head of the above mentioned designs with the only difference being the silicone shock pad, instead it uses the old method of using another plunger o-ring as a shock absorber just like the older Sillybutts designs like the SLAB and the Cynthia.
Why design it? Sure, the shock pad decreases dead space in the plunger tube but it seems that it needs to be custom made while you just need another plunger head o-ring with this solution. As mentioned above, the increased dead space in the plunger tube could slightly impact performance but it shouldn't be that bad.
Print Settings
Just like the other plunger heads you need to print it with 8 perimeters and 100% infill and with the front face on the print bed.