Nuki Ultra Cog Replacement (Spare Part)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yellow gear for Nuki Ultra locks, recreated in CAD. Best for resin printing.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 912
- Wydruki
- 2
- Wyświetlenia
- 2919
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This spare part is the yellow gear that attaches to the universal cylinder of the lock and serves as the transmission to the Nuki Ultra. Mine accidentally broke – likely because the gear has predefined weak points, probably designed to protect the motor from damage. I believe it can also break relatively easily with manual hand rotation.
Since there are currently no official spare parts available, I recreated the gear in CAD myself and can confirm that it fits perfectly.
However, it's important to mention that this model is primarily designed for resin printers. With a very fine nozzle (0.2 mm or smaller), it might work with an FDM printer, but I wouldn’t rely on it too much.
I hope you still find it helpful!
Use at your own risk. I accept no responsibility for any damage that may result.