1 / 2
Revox A77 tape recorder SPARE FEET — zdjęcie 1
1 / 2

Revox A77 tape recorder SPARE FEET

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement feet for the A77 tape recorder from Revox (PLA & TPU)

Ocena
5 / 5
Polubienia
3
Pobrania
143
Wydruki
1
Wyświetlenia
337
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The plug-in feet of the old Revox tape recorders can get lost or break off over time. You can buy them as replicas, but if you have a 3D printer you can now make them yourself.

The original is made of (presumably) ABS and has small blocks of (presumably) rubber that are pushed into it. The device rests directly on these blocks, which probably also serve as dampers against vibrations.

I have tried to reproduce this construction as accurately as possible on my model. The body is made of PLA but you can also use PETG, ASA or ABS. I printed the blocks from TPU with a wall thickness of 2 lines and minimal filling. You can also experiment here yourself. They should only have a certain flexibility if possible.

The photo shows an original part with gray rubber blocks at the back. In the foreground you can see a set of reproduced feet made of PLA + TPU

Tagi