horizontal filament spool holder - spool recycle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
an horizontal spool holder, the base is made with an empty spool suitable for 56mm internal diameter spools. 3 pieces:…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 1149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
an horizontal spool holder, the base is made with an empty spool suitable for 56mm internal diameter spools.
3 pieces:
a) basement, should be glued to the basement spool
b) bottom, there is room for a 22mm radial bearing
c) top, should be place ontop of the filament spool
you need also:
2 m8 autolocking nuts
1 m8 nut
1 m8 threaded rod 120mm
1 washer
assembly see pictures for reference
step 1: print basment piece and glue it to the basement spool
step 2: threaded rob assembly
step 3: place the bearing into the bottom piece
step 4: lock with the second autoblocking nut and washer
step 5: place the filament spool on top, place top piece and lock it with the nut
step 6: spool holder ready to go
You can find all my models here, thank you who will appreciate with a download or with a like