BB Gun | 4 Shots | built in magazine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A well working, 30 minute printed BB-gun to annoy your enemies!
- Ocena
- 4,508 / 5
- Polubienia
- 3190
- Pobrania
- 13 500
- Wydruki
- 67
- Wyświetlenia
- 84 769
- Oceny
- 63
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
31.12.2024
Version 3 is now available! It features an 8-round magazine, stronger spring, easier printing of bridges, stronger lever!
Check it out here: https://makerworld.com/en/models/934485#profileId-899040
Version 2.0 is released!
Featured: fully 3d printed (no hardware required) | improved range over 5m | facelift
click here:https://makerworld.com/en/models/892892#profileId-849883
A well working, 30 minute printed BB-gun to annoy your enemies!
3d printed parts:
- partial assembly (print-in-place)
- lever
- cover
- slide (magazine shutter)
hardware (not 3d printed):
- compression spring 0.3x4x20mm → just a “normal” pen spring
(see below at “Bill of Materials”)
- BBs 6mm Airsoft rounds (Ammunition)
Warning
This 3D model of a BB pistol is not a toy. While it may look like one, it can be potentially lethal if misused.
I assume no liability or responsibility for any damage, injury, or legal consequences resulting from the use, reproduction, or modification of this model.
Use responsibly and ensure compliance with all applicable laws and safety guidelines.
Assembly:
Layout of all the necessary parts.
Insert “BBG_Lever” into BBG_Partial_Assembly"
Add “BBG_Cover”
Insert the spring
Shut the magazine with “BBG_Slide”
Enjoy your new addicting Toy! :)