TS100 Adapter for RadioShack Solder Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to use the TS100 with an older RadioShack soldering Iron Stand.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I really like the RadioShack branded soldering iron stand that I have. Unfortunately, the stand was designed to be used with a larger soldering iron and the TS100 that I have right now didn't fit well. I removed the plastic cup that the soldering iron rests in and designed one that fits the TS100. This replacement cup is designed to have a 608RS bearing in the end to support the TS100 and hopefully keep the printed piece from melting. The bearing fits tightly and there is a lip to keep the bearing from coming out the back side of the cup. I printed with tree supports and I printed in PLA. If it does get deformed or melted, then I will remake it in PETG. My TS100 is setup to cool down automatically pretty quickly when sitting idle, so I don't expect to have an issue with having used PLA to print this.