Spool Caddy (Spool Holder)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improvement over the standard Mini+ spool holder
- Ocena
- 4,6 / 5
- Polubienia
- 68
- Pobrania
- 604
- Wydruki
- 5
- Wyświetlenia
- 4729
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
I find the spool holder that came with my MINI+ to be frustrating--constantly having to adjust the width so that the spool's edges ride on the bearings. So I made this. It needs no adjustment for width.
It uses the bearings that came out of the original spool holder. The holder, or caddy, as I like to call it, will accommodate spools up to 80mm wide. The widest spool I have is 76mm.
Printed at .2mm layer height, but .25 should work fine.
You'll want to attach some stick-on rubber feet on the bottom.
I made mine out of clear PLA because I have a 1kg spool of it that I'd otherwise never use up.