Guitar belt hanger for Hercules stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Guitar stand belt hanger to avoid tangling the belt between stand's feet.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
Because I don't have a lot of room in my man cave (studio), I need to move stuff around pretty often. I had an issue when my guitar's belt would loop around one of the stand's feet. So when I took the guitar the stand
To avoid future disaster I have designed a belt hanger that can be mounted to the Hercules guitar stand (diameter 23mm).
You will need one M3x25 screw with nut to fix it in place. 25mm may seem a little bit short but with a little squeeze will grab the nut and will not stick out.
I have multiple stands so I designed one for Hercules too: https://www.printables.com/model/1108916-guitar-belt-hanger-for-gravity-stand
Hardware: one M3x25 with nut