Traxxas TRX-4 transmission shift servo mounting bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Transferred from my Thingiverse account
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 88
- Wydruki
- 1
- Wyświetlenia
- 597
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I wanted to mount everything between the frame rails to keep the truck narrow for competition crawling, so this is just a simple bracket to mount the transmission shift servo in a better location.
The metal rod that hooks to the transmission linkage needs to be refitted to the underside of the linkage as seen in the photo, and the plastic ball cup on the metal rod may need adjusting.
Note, I recommend cleaning out the screw holes with a 2.5mm drill bit prior to assembly.
*The photos with the transmission removed are of the initial prototype bracket before i made a few shape improvements.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
0.2
Infill:
20
Notes:
Note, I recommend cleaning out the screw holes with a 2.5mm drill bit prior to assembly.
Category: R/C Vehicles