Southwire Smart Box single gang install jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Installation helper jig for Smart Box electrical boxes by Southwire.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Problem
You bought these fancy electrical boxes by Southwire, and after you're done marveling at how great they are, you realize that they can be kind of a pain to install flush and square to the finished wall.
Solution
An install jig that you temporarily mount onto the box, line up the placement, and secure the box to the framing.
The jig accepts two standard #6-32 screws, which then secure it to the electrical box. After the box is where you want it, secure the two mounting screws inside the Smart Box(TM) through the large opening in the middle.
Should be fine printer in PLA for this application, the rigidity will help coerce the box into the proper position.