THOR'S HAMMER - MUSEUM EXPOSURE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thor's hammer
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 180
- Wydruki
- 1
- Wyświetlenia
- 1193
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Public Domain
This is model of the Thor's hammer as a museum exposure. The base is 120 mm long and 70 mm wide. The hammer is 38 mm long and 23 mm wide. It is possible to print it on FDM and resin printer. But for FDM printer it has to be sized, because some parts would not be able to print correctly. I made it primary for resin printer, because i wanted to keep it small, but you can size it and print it on FDM. For resin printer it is completly ready as it is. Personaly, I Printed all of the parts of the hammer on resin printer. The base was printed on the FDM
I am planning to do more of these MCU museum exposures and if you have any ideas what else i should make, please write me.