EQHG1 Equatorial mount with harmonic gearing project
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple DIY Harmonic drive equatorial motorised telescope mount
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 1099
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- GNU General Public License v3.0
his is my record of a DIY equatorial mount for astronomy use. It is a design based on collated ideas from other projects and and it is designed to be built easily using readaily available parts and 3D printed parts. Whilst the goal has not been to make this the cheaapest project, consideration has been made in terms of 'value for money'. Please note, none of the links are affiliates, etc., they are just links to the products that I purchased myself and used on this project. It was designed to be clamped with the Vixen Dovetail standard. I only have a few clamps on hand, but they all seem to work fine.
It is set up in a modular fashion that building only one of the two motors, it can be used as a simple sky tracker. Using two will allow it to be used as a GoTo mount with dual axis tracking, etc.. Each module are identical. All 3D printed parts were printed on my Bambu P1S using Bambu Labs PETG-CF. I am sure other printer and filament combinations can be used, but you may need to test fit the parts as required.
As built, each module weights 1,537 g, so a total weight of just over 3.0 kg.
Here is the link to the GitHub with more information.
https://github.com/eeyoredave/EQHG1/tree/main