1 / 3
25.5x25.5 (M2) ELRS Nano Receiver Holder/Mount — zdjęcie 1
1 / 3

25.5x25.5 (M2) ELRS Nano Receiver Holder/Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A flexible lightweight holder for drone radio (ELRS) receivers

Ocena
0 / 5
Polubienia
1
Pobrania
65
Wydruki
0
Wyświetlenia
280
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

A simple and lightweight holder/mount for small radio receiver. Designed to suspend the receiver and keeping it from touching other conducting parts of the drone (You should still use proper heat shrink and insulation though). Print with TPU or similar flexible filament. For mounting with 25.5mm x 25.5mm M2 screw pattern.

Make sure to mount the higher extruded part facing the bottom. This higher extruded part is meant to space and suspend the receiver.

This is confirmed to work with the RadioMaster ELRS RP Nano series receivers (might be too small for the true diversity ones) and the SpeedyBee Nano ELRS receivers. Should work with other similar sized receivers

 

Solidworks file and STEP file provided for modification

Tagi