MOTOROLA HCH BRACKET
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket for a Motorola HCH. The main part is designed to hold a HCH reasonably securely and it can be attached to your…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Bracket for a Motorola HCH. The main part is designed to hold a HCH reasonably securely and it can be attached to your own custom mount. A sample bracket is included in the shapes.
The holes are for M3. The testbracket includes 5mm holes as I was playing with brass M3 inserts. These are just placed on the end of a soldering iron and gently melted into the plastic holes.
The spacing for the holes is 25mm x 20mm.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
.2 or .3+
Infill:
20%
Notes:
I recommend PETG although you could use PLA or ABS.
Post-Printing
Brass inserts for M3x10mm.
Category: Electronics