Toy Trash/Garbage Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small toy trash/garbage bin, to be used as anyone wants! E.g. for battery recycling
- Ocena
- 4,706 / 5
- Polubienia
- 112
- Pobrania
- 680
- Wydruki
- 21
- Wyświetlenia
- 2883
- Oceny
- 17
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Layerheight 0.2
The original is 50x50x100 mm and printed on a Mini.
I have included two different lids. One with a trashbin-symbol and one without.
I have also included a version which is 150% compared to the original.
I have also printed the 150% one and it turned out well. See photo!
The lid is attached to the bin with a piece of filament, maybe a bit hard to attach but should fit. The hole diameter in the lid is 2mm and the hole in the bin is 2.2mm. The filamanet is 1.75 but when printed horizontally the result comes out tight to the 1.75 filament.
If you print it I would be glad if you contribute with a photo!
Feel free
https://www.paypal.com/paypalme/gillislindstrom