Gridfinity LITE Flat - Fixed scoop generation
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remix is a fixed version of the .f3d file that generates the Lite bins with dividers
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 56
- Wydruki
- 1
- Wyświetlenia
- 362
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
In the original version by @Masibu_126487, when changing parameters in the Fusion 360 file, scoops generate wrongly for heights above 3 (21mm): a gap appears in the back of the front wall, leaving the scoop unsupported at its peak and much less useable, since small pieces could get lodged in that interstice.
I have thus modified the file to fix that issue, and uploaded it here. Generation is now consistent with heights of 3 and under, and the scoop merges with the front row correctly.
I also uploaded a 6-high, 5-wide bin with 7 subdivisions as an example.
| Original | Fixed |
|---|---|
 |  |