1 / 2
Husqvarna Svartpilen 401 narrower bar ends
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
"Stock bar ends are increasing width of handlebars and do not look too good.." - that was motivation for this :)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
"Stock bar ends are increasing width of handlebars and do not look too good.." - that was motivation for this :)
This printed part replaces just the external part of bar ends, internal tube with thread needs to remain to keep some weight on handlebars sides.
Original M6x65 bolts had to be replaced by M6x50.
Now handlebars are 14mm x 2 = 28mm narrower :)