Compact mobile phone handlebars crossbar mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Many stock mobile phone handlebar mounts i tried are quite high and thus less stable during the ride. I wanted…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
Many stock mobile phone handlebar mounts i tried are quite high and thus less stable during the ride. I wanted something as close to the mounting bar as possible, also i wanted it mounted on crossbar, which is much thinner than handlebars.
So i modeled this for specific phone i use for navigation - Samsung A5, which has a width of 74mm with the case. It has a clamping nut, that allows for maybe few MM of variance. Clamping nut is for better phone grip to not rely on plastic tension only - it uses M5x25 bolt and nut.
It clamps to crossbar using fully printed threads. I've uploaded 2 versions for the motorcycles that i measured crossbars on:
- 14.5mm - Husqvarna Svartpilen 401 2019
- 12mm - BMW GS 1150
I'm also uploading M5 knurled knob generated using https://www.thingiverse.com/thing:439239.