1 / 1
Toilet Brush & Roll Holder Combo (4 sizes)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sleek toilet brush holder with a built-in toilet roll holder, compatible with brushes from Ø75–90mm and stand
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 146
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Key Features:
- Broad Compatibility: Four versions available for brush diameters of 75mm, 80mm, 85mm, and 90mm, fitting a range of brands including IKEA brushes.
- Integrated Roll Holder: Fits standard toilet paper rolls with a 16mm diameter rod, designed in three segments for easy printing.
- Customizable Fit: Rods can be secured with a self-tapping screw (3.5–4x20mm) or an M6 screw for tighter configurations.
- Optimized Printing: Main body requires no supports; print rods laying flat with support for strength. Use a 1.2mm minimum wall thickness and lightning infill for material efficiency.
- Sturdy Construction: Designed for long-term use, with easy adjustments to meet individual needs.
Printing Instructions:
Main Body:
- Print without supports.
- Recommended infill: lightning.
- Wall thickness: minimum 1.2mm.
Roll Holder Rods:
- Print horizontally, using "support on build plate only."
- Recommended infill: >20%
- Wall thickness: minimum 1.6mm
Assembly:
- Choose the version matching your brush diameter (75mm, 80mm, 85mm, or 90mm).
- Assemble the three-segment roll holder by snapping or sliding the pieces together.
- Attach the roll holder to the main body; secure with a screw (4x20, self tapping) if needed.