1 / 1
Mini Triple Fidget Spinner
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mini Triple Fidget Spinner
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 89
- Wydruki
- 1
- Wyświetlenia
- 446
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (26)Powiązane
Required part:
- 608ZZ bearings or any 608 bearing
- M8 screw nut
Bearing dimensions: 8 * 22 * 7mm
Dimensions of the spinner: I designed the bearing location to be 21.8 mm. This will hold the bearings properly, but will not break them.
Dimensions of the knob: I designed the knob pin to 8.25 mm.
Bearing preparation
The bearings I bought needed preparation because they didn’t really spin from the grease.
- Check that the selected bearing rotates, is not clogged, broken bearing balls, etc.
- Soak in alcohol such as isopropyl. for a few hours.
- Remove from alcohol, clean or blow out with a high pressure compressor.
- Pour a little instrument oil on it, turn it a few times and wipe it off.
Assembly
- Of course, print out the modell. = D
- I used a press to insert the bearings, but it can also be used with a rubber hammer, a smooth, strong flat table, or a vise.
Comment
- I made it from Petg, but there was a pla that broke several times with the same settings as the others. It happened with one of the 6 types of pla.
- I tested the model with a high pressure compressor and several random drops, and it worked properly.
Print Settings
- Material: Petg
- Nozzle: 0.4mm
- Layerheight: 0.2mm
- Supports: Spinner: None / Knob: Build plate only