4 inch to 5 inch round electrical box offset adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapting a 4" round electrical to an offset 5" round plate. I made this for a ring flood light camera.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had a problem. Fusion and some filament solved it.
Please check your codes. In most Countries plastic components that are used in mains voltage locations are required to be made from a flame retardant material. You have been informed and are free to do you as I have no responsibility in your decision making.
Feel free to remix as you need. This was designed for a very specific problem and may not line up with your box holes. Offset is 18.71mm, or slightly less than ¾" (.73 inch). The lower right hole (right screw of the metal mount bar) can either take a screw large enough to thread into the plastic, or you can use an M3 heat set insert set in the back (inside) side. For my application the left screw lined up with the metal box screw tab. You can see how it fits together in the cover photo.