Slider Sign (Come In/ No Entry)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I changed the words from In/On to Come In/No Entry. I figured I'd post it here just to save people some time.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 128
- Wydruki
- 1
- Wyświetlenia
- 611
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
Modified the slider to have the words “come in” on one side and “no entry” on the other. I currently use on the door of my office, but now one seems to pay attention to it. Your results may vary ;) Had to scale it down to 15% to make it fit well on my Prusa Mini, and its a very good size for my door. I printed it at .1mm layer hight. The base took about an hour and the cover took about 15 minutes. The tolerances on the originally model where really nice so everything fits together nicely. As shown by the images above i did have to do two filament changes to get it to look like that. Obviously not necessary but it provides a nice amount of contrast.