Small Inline Filament Cutter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small (18mm) inline filament cutter that mounts to a bowden tube.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 779
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a small (18mm) inline filament cutter that mounts to a bowden tube. It utilizes 2 springs from click pens (3.5mm ID x 20mm long) and a 9mm snap blade section as well as two PC4-M6 fittings for parts. The threads are M6x1, I cleaned mine up with a tap after printing but it wasn't necessary. It needs to be printed with a .12mm layer height because of the fine detail, although I have not tried larger.
Parts List
4x20mm Spring out of a pen or (https://amzn.to/4fu72GS) x2
9mm Snap Off Blades (https://amzn.to/3BPebno) x1
PC4-M6 Bowden Tube Fitting (https://amzn.to/4gnzEmH) x2