Prusa Mini+ Stabilizer w/ integrated carry handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed it to help stabilize the Z-axis extrusion when printing projects that are near the max print volume.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 54
- Wydruki
- 2
- Wyświetlenia
- 338
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this for my Prusa Mini when I noticed the X-axis extrusion was a bit wobbly (approx ±2mm on the X-axis) causing poor print quality the closer it got to max build volume using input shaping. Noticeable ringing on the print surface. I added a handle for convenient carrying. Working great on my Mini!
I designed this to be printable on the Prusa Mini with no supports required. I recommend using PETG or a filament with higher temp rating. PLA is not recommended as it is near the heat bed and warps and gets a bit “melty” at 60C (140F). Download zip file for further instructions.
Designed using Shapr3D on a Surface Pro6. Have a look https://collaborate.shapr3d.com/v/lwSjuueex_7p-r3F32MV-