1 / 1
Crank Arm - modified to work with 6mm screw rod — zdjęcie 1

Crank Arm - modified to work with 6mm screw rod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

can accommodate a 6mm bolt

Ocena
0 / 5
Polubienia
1
Pobrania
22
Wydruki
0
Wyświetlenia
179
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution

The original crank was not secure enough with the single screw, so I modelled a hole that a 6mm bolt could fit into (give it a good push to get it into the hole) and can be screwed onto the bolt coming out of the bottom. Note - make sure you only turn the crank clockwise while playing

Tagi