Rear skid plate/ servo guard for Traction Hobby Cragsman 1/8 scale crawler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Transferred from my Thingiverse account
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I made this rear skid plate/ servo guard to replace the rear bumper bar on my Cragsman in order to gain a better departure angle and help protect the rear diff lock servo. It also has a small lip to help prevent the lower edge of the body from getting caught on rocks etc. Held in place with up to 4 screws (M3x8mm). Screw holes may need to be cleaned out with a 2.5mm drill bit.
Printed without supports when printed in the orientation shown in the picture.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
0.20mm
Infill:
20
Notes:
Printed without supports in the orientation shown.
Category: R/C Vehicles