1 / 4
Tow hitch for Traction Hobby Cragsman 1/8 scale crawler — zdjęcie 1
1 / 4

Tow hitch for Traction Hobby Cragsman 1/8 scale crawler

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Transferred from my Thingiverse account

Ocena
0 / 5
Polubienia
5
Pobrania
26
Wydruki
0
Wyświetlenia
218
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

I made this offroad tow hitch to tow a camper trailer behind my Cragsman. Designed to accept a Traxxas TRX-4 rod end. The lower side of the hitch has a hex opening to hold a plain M3 nut, and the pin is an M3 screw through an M3 wing nut. Printed on its side with 5 perimeters and solid infill. The holes may need to be cleaned up with a 3mm drill bit. Note: Spare tyre needs to be removed.

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3

**Rafts:**

No

Supports:

No

**Resolution:**

0.15

Infill:

100

**Filament:** Esun PLA Black

Category: R/C Vehicles

Tagi