Extruder motor rotation visualiser- Nissan steering wheel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Transferred from my Thingiverse account
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Extruder motor rotation visualiser- Steering wheel ripped from a Nissan D22 Navara/ Frontier 3D model. This style steering wheel has been used globally across a range of Nissan vehicles (And possibly Infinity vehicles). Has a screw hole on the rear face to take a 3x8mm countersunk screw so it can stick to a magnet. (8x3mm rare earth neo magnet required for Prusa Mk3) My previous steering wheel had the magnet glued on, but it didn't stick for long, so this one uses the screw for the magnet to stick to instead. I printed the steering wheel with the rear face against the heated bed at a layer height of 0.05mm. It's a bit 'low-poly' but still looks reasonable.
Requires 3x8mm (M3, 8mm long) countersunk screw, and 8x3mm rare earth neo magnet to suit Prusa/ Nema 17 stepper motors.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
Yes
0.05
Infill:
20
Category: 3D Printer Parts