Acura Integra B-series shift linkage bushing (transmission side)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of the shift linkage bushing on the transmission side of a B Series Acura Integra. This should be very…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 170
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a model of the shift linkage bushing on the transmission side of a B Series Acura Integra. This should be very accurate but the only part I wasn't 100% sure on was the taper for the dished side of the bushing as I didn't have the washer handy to measure but I calculated it as close as I could with my old ripped bushing, if anything is off let me know and I can adjust it. Also, I made it a split bushing for easy install.
NOTE: I recommend printing in TPU since bushings are usually made of urethane or rubber, 100% infill recommended.
Category: Automotive
If you would like to leave a small tip for my hard work you can do so here :D https://www.paypal.com/ncp/payment/Y5DRF7PN8S5AJ