Honda Civic EG/ Del Sol Shift Linkage Bushing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of a Honda shift linkage bushing that holds the shift linkage arm to the body right under the shift…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a model of a Honda shift linkage bushing that holds the shift linkage arm to the body right under the shift lever. The dimensions should be exact but this is my first time doing 3d modeling so let me know if anything is off. You'll need to obviously reuse your two little metal sleeves that go into the two bolt holes from your old bushing.
NOTE: I recommend printing in TPU since bushings are usually made of urethane or rubber, 100% infill recommended.
Category: Automotive
If you would like to leave a small tip for my hard work you can do so here :D https://www.paypal.com/ncp/payment/Y5DRF7PN8S5AJ