Keks Light Meter Adapter for Nikon F
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom adapter to mount a Keks light meters to a Nikon F camera
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 203
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a custom adapter to mount a Keks light meters to a Nikon F camera. Nikon F camera don't use the usual cold shoe mounts found in most cameras. There are adapters for Nikon F flash mount to typical cold shoe but it results in an ugly and tall stack up. I wanted an adapter that directly mounts to a Keks light meter.
I have a Keks KM02 which I am using on my Nikon FTN. But this should work for most Nikon F and Keks light meters.
The adapter has a row of mounting holes so you can fine tune the lateral position of the light meter.
Print Instructions:
- Print orientation matters. Print top side down (left photo) for aesthetics. Print front/back side down (right photo) for optimal strength.
- Supports recommended
- Layer height: 0.15 - 0.20 mm
- Wall lines: 3
- Infill: 30-40%
- Temperature: follow recommended for material type
- After printing, use screw to ream holes if oblong. Screws should be able to freely rotate in screw holes.