MiSTer FPGA Console Case with TapTo integration

TapTo dock plate is available separately at https://www.printables.com/model/1007354-tapto-nfc-consolized-dock-for-mister-pi-case as it has an incompatible CC license.

Additional items needed for this:

• 1.3 inch i2c oled screen: https://www.aliexpress.com/item/1005005620039720.html
• USB SATA Adaptor (if you want to use an ssd, it fits): https://www.aliexpress.com/item/1005007317731190.html
• RJ45 Extension 0.25m (Right Angle, i have Left Angle and it's not great but works): https://www.aliexpress.com/item/1005003028879117.html
• DC Power plug cable 5.5*2.1 0.3m: https://www.aliexpress.com/item/1005004104968956.html
• Micro SD to Micro SD Extension: https://www.aliexpress.com/item/1005001928805506.html
• Metal Push Button LED Switch, 1NO 3-6V Self Locking 16mm: https://www.aliexpress.com/item/1005007168217107.html
• HDMI Joiner: https://www.aliexpress.com/item/1005006183651434.html
• HDMI to HDMI Right Angle 0.15m cable: https://www.aliexpress.com/item/1005007102981790.html
• DC Plug Socket 5.5*2.1: https://www.aliexpress.com/item/1005001852717244.html
• USB 2.0 Female DIP: https://www.aliexpress.com/item/1005005776162012.html
• USB 2.0 Male DIP: https://www.aliexpress.com/item/1005005776162012.html
• XH2.54 4 Pin Double head cables: https://www.aliexpress.com/item/4000308361562.html
• XH2.54 4 Pin sockets for the above….or just solder wire to each one instead.
• M2.5 6mm screws for the front usb and sd card.
• Various M3 screws to close it up and mount the mister stack.
• I don't think i missed anything!… probably did. 🤣