Remixed DeLonghi Dedica portafilter holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed version of the portafilter holder, with magnets.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 163
- Wydruki
- 0
- Wyświetlenia
- 862
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Changed the original to have a much looser fit on the portafilter (making it easier to lift off without taking the holder with it).
I also added slots for magnets and anti-slip silicone bumpers/feet.
The anti-slip domes are necessary for the holder to stay in place, and they should just peek over the edge of the indention.
-The magnets need to be 10mm in diameter, and 1.8mm thick.
-The silicone bumpers need to be 6mm in diameter and 2.5mm thick. (Such as ASIN: B01GVA0AEI)
There is also a small optional (very optional… Just skip it) dripcatcher that sticks to the machine below the portafilter holder. It also uses magnets and anti slip feet.
The portafilter holder uses 2x magnets and 5x anti-slip feet.
The dripcatcher uses 2x magnets and 2x anti-slip feet.
The magnets slide into the slots and should be glued in place.