Remixed DeLonghi Dedica tamper holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed version of the tamper holder, with magnets.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 407
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Changed the original to have a looser fit so that the tamper can be lifted more before catching on the holder.
I also added slots for magnets and anti-slip silicone bumpers/feet.
The anti-slip domes are necessary for the holder to stay in place, and they should just peek over the edge of the indention.
-The magnets need to be 10mm in diameter, and 1.8mm thick.
-The silicone bumpers need to be 6mm in diameter and 2.5mm thick. (Such as ASIN: B01GVA0AEI)
The tamper holder uses 2x magnets and 4x anti-slip feet.
The magnets slide into the slots and should be glued in place.
It also needs to be printed with some supports in the middle for best results.
Cleaning up the supported overhangs with an abrasive buffing wheel leaves a smooth finish.