3D Printer Emission Sensor Array Bento Box Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bento Box v2 housing for Tom's (@MadeWithLayers) Sensorbox v2's recommended sensors.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 774
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Why would you run your filter fans if the air is already clean? Why would you detect air quality if you can't clean it?
This model takes the recommended sensors from Sensorbox v2 and puts them inside a BentoBox v2 compatible box.
The boards and particle sensor fit snugly in their sockets, but I've added brackets to the side of the boards so that retainer clips can be added for a more secure hold.
Sensors:
- PMS5003
- BMP280
- SCD40
- SGP30
The pictures are from the first print, and the model has wider clearance for wires and I've removed the support beam for the PMS5003, since the socket holds it well enough. When inserting the sensors, put the PMS5003 in first with the fan hole oriented upwards. Link all the boards together with QWIIC connectors first, then install each board one at a time. Separate each wire and install them one at a time into the wire holes.