1 / 3
XIAO Sense Case (Seeed Studio XIAO ESP32S3 Sense, Camera) with X-Axis Ball-Link for MK4S
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small case for XIAO Sense (ESP32S3 with Camera) with Camera mount for MK4/MK4S X-Axis Motor with 16mm Ball Joint
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 116
- Wydruki
- 1
- Wyświetlenia
- 1539
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (25)Powiązane
WARNING
The webcam application gets the board too hot for PLA even with the heat sink. You'll need to use PETG which has been fine for me so far in limited testing.
Summary
Small case for the Seeed Studio XIAO ESP32S3 Sense with a heatsink at the backside.
Print Settings
- Material: PETG
- Layer Height: 0.25mm
- Infill: 25% (doesn't really matter)
- Support: Yes