Cable Wrap Brackets for VEVOR Stainless Steel Work Table
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket you can use to wrap an electrical cable around.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Standard Digital File License
Designed to fit this 24x18x34 inch stainless steel work table.
License
This project is Open Hardware. All source files are licensed under the CERN-OHL-W v2.
You may redistribute and modify this documentation and make products using it under the terms of the CERN-OHL-W v2 (https:/cern.ch/cern-ohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN-OHL-W v2 for applicable conditions.
Why doesn't the license section below match this?
The license notice at the bottom of this page is incorrect. Prusa still needs to fix the license menu to include either an appropriate OSHW license or add a “custom” option. Until then, the only viable option is to select “standard digital file license”. I encourage Prusa to add support for CERN OHL and similar licenses such as Solderpad on this site.
What is CERN-OHL-W v2?
CERN OHL is a open source license tailored specifically for hardware designs. There are a number of protections that software and CC licenses do not cover. You are free to remix this design so long as you leave the license notice intact.
✖ | Sharing without ATTRIBUTION
✔ | Remix Culture allowed
✔ | Commercial Use
✔ | Free Cultural Works
✔ | Meets Open Definition
ℹ | Keep original license intactA request for Prusa
If you are going to support open source hardware, please do it right! Please add support for additional open source licenses (particularly for the CERN-OHL v2 licenses), or add a custom license option that allows users to customize permissions.
Source Files
Feel free to make modifications to this! STEP files are available for general adjustments in any CAD software. This project was designed using the Link branch of FreeCAD. If you plan to make modifications, I highly recommend using this version, as the included .FCStd files may not function as expected if loaded into into a regular build of FreeCAD.