Speaker Interface for 1/4"-20 threaded mount holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Speaker Interface for 1/4"-20 threaded mount holes, such as found on the Polk Audio RM6761 satellite speakers.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
Speaker Interface for 1/4"-20 threaded mount holes, such as found on the Polk Audio RM6761 satellite speakers.
Note that in my case, the speakers were quite heavy for the original articulating mount design and are weighed down so they were constantly tilting down. To fix this, both pieces could be modified to have a notching system, but I just printed a simple 1mm thick washer out of TPU and stuck it between this piece and the other piece it attaches to, and all is well, now.
I included the OpenSCAD source so you could adapt it to other sizes of mount holes.