Intel Stock Cooler Fan Shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fan shroud for intel laminar stock cooler to improve airflow in certain SFF cases.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this fan shroud to help improve the airflow in my SFF case with the Intel stock cooler. Extends the inlet of the fan to the side of the case to access fresh air and greatly improved the cooling. The shroud simply clips on the cooler and is secure enough that I've never had issues in the 6 months using it.
NOTE: This is designed specifically for my case and, depending on the spacing from the cooler to the side of your case, you will likely need to change the height to fit your case.
Print with at least 2 wall loops and 10% infill, no supports needed.