Dextro Energy EDC case, made for Diabetics.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sugar is vital for a diabetic and we need to carry it with us every day, all the time, just in case.
- Ocena
- 4,5 / 5
- Polubienia
- 47
- Pobrania
- 471
- Wydruki
- 1
- Wyświetlenia
- 2242
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Sugar in some sort should be EDC by all diabetics and Dextro Energy is a good option in my opinion.
The case will prevent the packaging from ripping and the tabs to crumble in your pocket or purse.
It is a bit snug in the beginning but when broken in (takes no time), it's a really good fit! Maybe not water tight over time but it will surely protect the tabs if fully submerged for a short time.
Print settings:
Material: Only tried PETG and TPU but anything should work really!
Perimeters: 2 is enough with a 0.4 mm nozzle. Just make sure the perimeters covers the complete wall thickness.
Infill: Doesn't matter, or 100% if printing in other than 0.2 mm layers.
Layers: 6 bottom, 4 top (standard setting).
I personally prefer the original lid with no tolerance and breaking it in by hand, it's a bit tough in the very beginning but it will be a nice poppy fit after a little while if you have a well tuned printer! :)
Stay safe an always keep your sugar close!
Update 2022-01-08:
Added lid with more tolerance.
Update 2022-01-12:
Adjusted the tolerance for the lid with more tolerance.