Ping Pong Mod for Festool Multifunction Table MFT 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
enjoy your lunch break with a quick game of ping pong on your Festool Multifunction Table
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 1287
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
for this mod you'll need the following parts:
- Angle Brackets for Festool Multifunction Table MFT 3 (2x brackets_long; printables no. 1111183)
- Festool Abrasive holder with positioning aid (1x D150 holder + 2x T nuts; printables no. 980275)
- Festool Guide rail holder (2x rail holder which fits your guide rail + 4x T nuts; printables no. 806300)
- 4x countersunk head bolts M5x20 (x25 max.)
- 4x hex. nuts M5
angle brackets will be mounted on the MFT by simply putting them on
T nuts (from printables no. 980275) need to be mounted with the metric bolts to the guide rail holder, then slid on the brackets
paddle grip put on the paddle and can then be stored in the Abrasive holder (the paddle can also be used as a positioning aid for the abrasives, the alligment pins are identical to parts by Festool)
unfortunately I don't have a MFT to test this absolutely useful mod but hopefully it'll make you laugh (and maybe even someone acutally tries this)