1 / 2
Gridfiity CNC Tool Holder for Cadence Mfg Jenny Bits — zdjęcie 1
1 / 2

Gridfiity CNC Tool Holder for Cadence Mfg Jenny Bits

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Rearranged ridges and valleys to support 6 mm dia tubes for Jenny bits made by Cadence Mfg

Ocena
0 / 5
Polubienia
11
Pobrania
45
Wydruki
0
Wyświetlenia
421
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity accessories at https://bit.ly/3E2NxnZ

Zack Freedman's parametric source file for tubes that I used.

https://a360.co/3rFWH4X

These holders securely store CNC tools, drill bits, and other things with 1/8", 1/4", and 3mm shanks.

Gridfinity Tips!

  • No brims or support required!
  • Use any filament with an 0.6mm or smaller nozzle.
  • Wider bins can curl, so maximize your bed adhesion if you're going big!
  • All storage blocks are compatible with all baseplates!
  • Most storage blocks are stackable!
  • You can add 6x2mm magnets to the corners! They won't magnetize the contents.
  • You can also use M3 screws in the corners.

Tagi