Radio Speaker-Microphone Knob Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Knob-style mount and receiver for Commountain CM01-M2P Radio Speaker Microphone
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Recently purchased a Commountain CM01-K2P Speaker Microphone (https://www.amazon.com/dp/B01N9MA138) to use with my handheld radio.
The included swivel clip works well if you want to affix the mic to one location, like on a shirt. The clip is not very useful when used in other situations. I figured a knob-style mounting mechanism would work better, but I was unable to find any compatible options for the CM01-K2P, so I started designing a knob mount that would work.
Knob mount slides into microphone similar to original clip and is secured via friction. The Knob Receiver is provided by Tibitech. It can be mounted using double-sided tape or by using the screw holes included.
Printed everything in PLA with 100% infill. Supports will be needed for printing the Knob mount.m