1 / 5
Sanremo Cube _ Flashing Led cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sanremo Cube R espresso machine is flashing the power light constantly when in Sleep mode. This small insert fixes that
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Design goal:
- Insert that can block the flashing power led while the Sanremo is in sleep mode
- Can be slid up to see all leds in case you want to use the Sanremo menu system (where the Led lights are used to navigate functions)
- Design to be as invisible as possible
Printing:
- STL is oriented correctly
- Part is so small, infill does not matter
- I printed it in ASA but can be done in any material
Installation:
- The insert snaps in the oval window around the leds
- Ensure the slightly thicker portion is oriented on top
- If you look closely (and your z-offset was good), there is a small lip around the print. The lip goes towards the machine and should snap slightly behind the metal plate