Planter 02 with drainage holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of simple planter with ornaments with drainage system
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 269
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted the planter with drainage holes, so I made a remix. Major credits go to the original creator https://www.prusaprinters.org/social/3373-wilko/about
Print instructions:
- use vase mode
- lots of solid bottom layers. I had 15 (depends on your scaling. use slicer picture for reference)
- I used PLA (3dJake ecoPLA glitter brown), ASA with smoothing or PETg should be great too (or better ;-) )
Post print instructions:
- remove the designed in supports with cutter/pliers/nippers/.. . This are not so good to remove, but in the end it is not a big deal.
- clear the holes you need with cutter/drill
additional notes
I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.
If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.
In general my Prints are not for commercial use, but if you a print farm owner and want to sell some of my stuff, please contact me.
Hope you enjoy my models.