Prusa Enclosure Transport Handle Improvement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the Prusa transport handle with design improvements for lifting and wider fastening square nuts.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 104
- Wydruki
- 6
- Wyświetlenia
- 327
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
This remix improves the original transport handle design on the Original Prusa Enclosure.
It was immediately apparent that the original design concentrates stress poorly on a generally weak joint of the bolt and steel profile. Additionally, the M3nS insert slots for the square nuts were too small for some nuts (a manufacturing variance).
This design solves both issues. The handles feel much more rigid and supports its weight better. This design I feel is a must for anyone moving the Enclosure with a printer still inside it.
FASTENERS: Uses same M3 hardware as base model
PRINTING:
The original Prusa Transport Handle material suggests PETG, however with this remix PLA+ was used and is suggested.
Printing/Slicing suggestions:
0.28 (Draft) Layer Height
To further increase strength, Infill 10% and rectilinear
4 perimeters (area around bolts)
Please reach out to me with any concerns.